PHYSICS
WAEC SYLLABUS ON PHYSICS
PREAMBLE:
The syllabus is evolved from the Senior Secondary School teaching syllabus and is intended to indicate the scope of the course for Physics examination. It is structured with the conceptual approach. The broad concepts of matter, position, motion and time; energy; waves; fields; Atomic and Nuclear Physics, electronics are considered and each concept forms a part on which other sub-concepts are further based.AIMS
The aims of the syllabus are to enable candidates:(1) acquire proper understanding of the basic principles and applications of Physics;
(2) develop scientific skills and attitudes as pre-requisites for further scientific activities;
(3) recognize the usefulness, and limitations of scientific method to appreciate its applicability ion other disciplines and in every life;
(4) develop abilities, attitudes and skills that encourage efficient and safe practice;
(5) develop scientific attitudes such as accuracy, precision, objectivity, integrity, initiative and inventiveness.
ASSESSMENT OBJECTIVES
The following activities appropriate to Physics will be tested:(1) Acquisition of knowledge and understanding:
Candidates should be able to demonstrate knowledge and understanding of (a) Scientific phenomena, facts laws, definitions, concepts and theories;
(b) Scientific vocabulary, terminology and conventions (including symbols, quantities and units);
(c) The use of scientific apparatus, including techniques of operation and aspects of safety;
(d) Scientific quantities and their determinations;
(e) Scientific and technological applications with their social economic and environmental implications.
(2) Information Handling and Problem-solving
Candidates should be able, using visual, oral, aural and written (including symbolic, diagrammatic, graphical and numerical) information to(a) locate select, organize and present information from a variety of sources including everyday experience;
(b) analyse and evaluate information and other data;
(c) use information to identify patterns, report trends and draw inferences;
(d) present reasonable explanations for natural occurrences, patterns and relationships;
(e) make predictions from data.
(3) Experimental and Problem-Solving Techniques
Candidates should be able to(a) follow instructions;
(b) carry out experimental procedures using apparatus;
(c) make and record observations, measurements and estimates with due regard to precision, accuracy and units;
(d) interpret, evaluate and report on observations and experimental data;
(e) identify problems, plan and carry out investigations, including the selection of techniques, apparatus, measuring devices and materials;
(f) evaluate methods and suggest possible improvements;
(g) state and explain the necessary precautions taken in experiments to obtain accurate results.
SCHEME OF EXAMINATION
There will be three papers, Papers 1, 2 and 3, all of which must be taken. Papers 1 and 2 will be a composite paper to be taken at one sitting.PAPER 1:
Will consist of fifty multiple choice questions lasting 1¼ hours and carrying 50 marks.PAPER 2:
Will consist of two sections, Sections A and B lasting1½ hours and carrying 60 marks.Section A -
Will comprise seven short-structured questions. Candidates will be required to answer any five questions for a total of 15 marks.Section B -
Will comprise five essay questions out of which candidates will be required to answer any three for 45 marks.PAPER 3:
Will be a practical test for school candidates or an alternative to practical work paper for private candidates. Each version of the paper will comprise three questions out of which candidates will be required to answer any two in 2¾ hours for 50 marks.DETAILED SYLLABUS
It is important that candidates are involved in practical activities in covering this syllabus. Candidates will be expected to answer questions on the topics set in the column headed ‘ TOPIC’. The ‘NOTES’ are intended to indicate the scope of the questions which will be set but they are not to be considered as an exhaustive list of limitations and illustrations.
INTERACTION OF MATTER, SPACE & TIME |
||
|---|---|---|
TOPICS |
CONTENTS |
NOTES |
1. Concepts of matter |
Concepts of matter |
Simple structure of matter should be discussed. Three physics states of matter, namely solid, liquid and gas should be treated. Evidence of the particle nature of matter e.g. Brownian motion experiment, Kinetic theory of matter. Use of the theory to explain; states of matter (solid, liquid and gas), pressure in a gas, evaporation and boiling; cohesion, adhesion, capillarity. Crystalline and amorphous substances to be compared (Arrangement of atoms in crystalline structure to be described e.g. face centred, body centred. |
2. Fundamental and derived quantities and units |
(a) Fundamental quantities and units |
Length, mass, time, electric current luminous intensity, thermodynamic temperature, amount of substance as examples of fundamental quantities and m, kg, s, A, cd, K and mol as their respective units. |
(b) Derived quantities and units |
Volume, density and speed as derived quantities and m3, kgm-3 and ms-1 as their respective units. | |
3. Position, distance and displacement. |
(a) Concept of position as a location of point-rectangular coordinates. |
Position of objects in space using the X,Y,Z axes should be mentioned. |
(b) Measurement of distance |
Use of string, metre rule, vernier calipers and micrometer screw gauge. Degree of accuracy should be noted. Metre (m) as unit of distance. | |
(c) Concept of direction as a way of locating a point –bearing |
Use of compass and a protractor. | |
(d) Distinction between distance and displacement. |
Graphical location and directions by axes to be stressed. | |
4. Mass and weight |
Mass and weight |
Use of lever balance and chemical/beam balance to measure mass and spring balance to measure weight. Mention should be made of electronic/digital balance. |
Distinction between mass and weight |
Kilogram (kg) as unit of mass and newton (N) as unit of weight. | |
5. Time |
(a) Concept of time as interval between physical events |
The use of heart-beat, sand-clock, ticker-timer, pendulum and stopwatch/clock. |
(b) Measurement of time |
Second(s) as unit of time. | |
6. Fluid at rest |
(a) Volume, density and relative density |
Experimental determination for solids and liquids. |
(b) Pressure in fluids |
Concept and definition of pressure. Pascal’s principle, application of principle to hydraulic press and car brakes. Dependence of pressure on the depth of a point below a liquid surface. Atmospheric pressure. Simple barometer, manometer, siphon, syringe and pump. Determination of the relative density of liquids with U-tube and Hare’s apparatus. | |
(c) Equilibrium of bodies |
Identification of the forces acting on a body partially or completely immersed in a fluid. | |
(i) Archimedes’ principle |
Use of the principle to determine the relative densities of solids and liquids. | |
(ii) Law of flotation |
Establishing the conditions for a body to float in a fluid. Applications in hydrometer, balloons, boats, ships, submarines etc. | |
7. Motion |
(a) Types of motion: Random, rectilinear, translational, Rotational, circular, orbital, spin, Oscillatory. |
Only qualitative treatment is required. Illustration should be given for the various types of motion. |
(b) Relative motion |
Numerical problems on co-linear motion may be set. | |
(c) Cause of motion |
Force as cause of motion. | |
(d) Types of force: |
Push and pull | |
(ii) Non-contact force(field force) |
These are field forces namely; electric and magnetic attractions and repulsions; gravitational pull. | |
(e) Solid friction |
Frictional force between two stationary bodies (static) and between two bodies in relative motion (dynamic). Coefficients of limiting friction and their determinations. Advantages of friction e.g. in locomotion, friction belt, grindstone. Disadvantages of friction e.g reduction of efficiency, wear and tear of machines. Methods of reducing friction; e.g. use of ball bearings, rollers, streamlining and lubrication. | |
(f) Viscosity (friction in fluids) |
Definition and effects. Simple explanation as extension of friction in fluids. Fluid friction and its application in lubrication should be treated qualitatively. Terminal velocity and its determination. | |
(g) Simple ideas of circular motion |
(i) demonstrate motion in a
Vertical/horizontal circle. (ii) show the difference between angular speed and velocity. (iii) Draw a diagram to illustrate centripetal force. Banking of roads in reducing sideways friction should be qualitatively discussed. |
|
8. Speed and velocity |
(a) Concept of speed as change of distance with time |
Metre per second (ms-1) as unit of speed/velocity. |
(b) Concept of velocity as change of displacement with time |
||
(c) Uniform/non-uniform speed/velocity |
Ticker-timer or similar devices should be used to determine speed/velocity. Definition of velocity as Δs/Δt. | |
(d) Distance/displacement-time graph |
Determination of instantaneous speed/velocity from distance/displacement-time graph and by calculation. | |
9. Rectilinear acceleration |
(a) Concept of Acceleration/deceleration as increase/decrease in velocity with time. |
Unit of acceleration as ms-2 |
(b) Uniform/non-uniform acceleration |
Ticker timer or similar devices should be used to determine acceleration. Definition of acceleration as Δv/Δt | |
(c) Velocity-time graph |
Determination of acceleration and displacement from velocity-time graph | |
(d) Equations of motion with constant
acceleration; |
Use of equations to solve numerical problems. | |
10. Scalars and vectors |
(a) Concept of scalars as physical quantities with magnitude and no direction |
Mass, distance, speed and time as examples of scalars. |
(b) Concept of vectors as physical quantities with both magnitude and direction. |
Weight, displacement, velocity and acceleration as examples of vectors. | |
(c) Vector representation |
||
(d) Addition of vectors |
||
(e) Resolution of vectors |
Obtain the resultant of two velocities analytically and graphically. | |
(f) Resultant velocity using vector representation. |
||
11. Equilibrium of forces |
(a) Principle of moments |
Torque/Moment of force. Simple treatment of a couple, e.g. turning of water tap, corkscrew and steering wheel.) |
(b) Conditions for equilibrium of rigid bodies under the action of parallel and non-parallel forces. |
Use of force board to determine resultant and
equilibrant forces. Treatment should include
resolution of forces into two perpendicular directions
and composition of forces
Parallelogram of forces. Triangle of forces. Should ne treated experimentally. Treatment should include stable, unstable and neutral equilibra. |
|
(c) Centre of gravity and stability |
Use of a loaded test-tube oscillating vertically in a liquid, simple pendulum, spiral spring and bifilar suspension to demonstrate simple harmonic motion. | |
12. Simple harmonic motion |
(a) Illustration, explanation and definition of simple harmonic motion (S.H.M) |
|
(b) Speed and acceleration of S.H.M. |
Relate linear and angular speeds, linear and angular accelerations. | |
(c) Period, frequency and amplitude of a body executing S.H.M. |
Experimental determination of ‘g’ with the simple pendulum and helical spring. The theory of the principles should be treated but derivation of the formula for ‘g’ is not required | |
(d) Energy of S.H.M |
Simple problems may be set on simple harmonic motion. Mathematical proof of simple harmonic motion in respect of spiral spring, bifilar suspension and loaded test-tube is not required. | |
(e) Forced vibration and resonance |
Distinction between inertia mass and weight | |
13. Newton’s laws of motion: |
(a) First Law: Inertia of rest and inertia of motion |
Use of timing devices e.g. ticker-timer to determine the acceleration of a falling body and the relationship when the accelerating force is constant. |
(b) Second Law: Force, acceleration, momentum and impulse |
Linear momentum and its conservation. Collision of elastic bodies in a straight line. | |
(c) Third Law: Action and reaction |
Applications: recoil of a gun, jet and rocket propulsions. | |
ENERGY: Mechanical and Heat |
||
TOPICS |
CONTENTS |
NOTES |
14. Energy: |
(a) Forms of energy |
Examples of various forms of energy should be mentioned e.g. mechanical (potential and kinetic), heat chemical, electrical, light, sound, nuclear. |
(b) World energy resources |
Renewable (e.g. solar, wind, tides, hydro, ocean waves) and non-renewable (e.g. petroleum, coal, nuclear, biomass) sources of energy should be discussed briefly. | |
(c) Conservation of energy. |
Statement of the principle of conservation of energy and its use in explaining energy transformations. | |
15. Work, Energy and Power |
(a) Concept of work as a measure of energy transfer |
Unit of energy as the joule (J) |
(b) Concept of energy as capability to do work |
Unit of energy as the joule (J) while unit of electrical consumption is KWh. | |
(c) Work done in a gravitational field. |
Work done in lifting a body and by falling bodies | |
(d) Types of mechanical energy |
Derivation of P.E and K.E are expected to be known. Identification of types of energy possessed by a body under given conditions. | |
(e) Conservation of mechanical energy. |
Verification of the principle. | |
(f) Concept of power as time rate of doing work. |
Unit of power as the watt (W) | |
(g) Application of mechanical energymachines. Levers, pulleys, inclined plane, wedge, screw, wheel and axle, gears. |
The force ratio (F.R), mechanical advantage (M.A), velocity ratio (V.R) and efficiency of each machine should be treated. Identification of simple machines that make up a given complicated machine e.g. bicycle. Effects of friction on Machines. Reduction of friction in machines. | |
16. Heat Energy |
(a) Temperature and its measurement |
Concept of temperature as degree of hotness or
coldness of a body. Construction and graduation of
a simple thermometer. Properties of thermometric liquids. The following thermometer, should be treated: Constant – volume gas thermometer, resistance thermometer, thermocouple, liquid-in-glass thermometer including maximum and minimum thermometer and clinical thermometer, pyrometer should be mentioned. Celsius and Absolute scales of temperature. Kelvin and degree Celsius as units of temperature. |
(b) Effects of heat on matter e.g |
Use of the Kinetic theory to explain effects of heat. | |
(i) Rise in temperature |
Mention should be made of the following effects: | |
(ii) Change of phase state |
Change of colour | |
(iii) Expansion |
Thermionic emission | |
(iv) Change of resistance |
Change in chemical properties | |
(c) Thermal expansion – Linear, area and volume expansivities |
Qualitative and quantitative treatment Consequences and application of expansions. Expansion in buildings and bridges, bimetallic strips, thermostat, over-head cables causing sagging nd in railway lines causing buckling. Real and apparent expansion of liquids. Anomalous expansion of water. |
|
(d) Heat transfer – Condition, convention and radiation. |
Per Kelvin (K-1) as the unit of expansivity. Use of the kinetic theory to explain the modes of heat transfer. Simple experimental illustrations. Treatment should include the explanation of land and sea breezes, ventilation and application s in cooling devices. The vacuum flask. |
|
(e) The gas laws-Boyle’s law Charles’ law, pressure law and general gas law |
The laws should be verified using simple apparatus. Use of the kinetic theory to explain the laws. Simple problems may be set. Mention should be made of the operation of safety air bags in vehicles. | |
(f) Measurement of heat energy: |
Use of the method of mixtures and the electrical method to determine the specific heat capacities of solids and liquids. Land and sea breezes related to the specific heat capacity of water and land, Jkg-1 K-1 as unit of specific heat capacity. | |
(g) Latent heat |
Explanation and types of latent heat. | |
(ii) Melting point and boiling Point |
Determination of the melting point of solid and the boiling point of a liquid. Effects of impurities and pressure on melting and boiling points. Application in pressure cooker. | |
(iii) Specific latent heat of fusion and of vaporization |
Use of the method of mixtures and the electrical
method to determine the specific latent heats of
fusion of ice and of vaporization of steam. Applications in refrigerators and air conditioners. Jkg-1 as unit of specific latent heat |
|
(h) Evaporation and boiling |
Effect of temperature, humidity, surface area and draught on evaporation to be discussed. | |
(i) Vapour and vapour pressure |
Explanation of vapour and vapour pressure. Demonstration of vapour pressure using simple experiments. Saturated vapour pressure and its relation to boiling. | |
(j) Humidity, relative humidity and dew point |
Measurement of dew point and relative humidity. Estimation of humidity of the atmosphere using wet and dry-bulb hygrometer. | |
(k) Humidity and the weather |
Formation of dew, fog and rain. | |
WAVES |
||
TOPICS |
CONTENTS |
NOTES |
17. Production and propagation of waves |
(a) Production and propagation of mechanical waves |
Use of ropes and springs (slinky) to generate mechanical waves |
(b) Pulsating system: Energy transmitted with definite speed, frequency and wavelength. |
Use of ripple tank to show water waves and to demonstrate energy propagation by waves. Hertz(Hz) as unit of frequency. | |
(c) Waveform |
Description and graphical representation. Amplitude, wave length, frequency and period. Sound and light as wave phenomena. | |
(d) Mathematical relationship connecting frequency (f), wavelength(𝛌), period (T) and velocity (v) |
V= f𝛌 and T = 1/f simple problems may be set. |
|
18. Types of waves |
(a) Transverse and longitudinal |
Examples to be given |
(b) Mathematical representation of wave motion. |
Equation y = A sin (wt ± 2πx/λ) to be explained Questions on phase difference will not be set. | |
19. Properties of waves: |
Reflection, refraction, diffraction, Interference, superposition of progressive waves producing standing stationary waves |
Ripple tank should be extensively used to demonstrate these properties with plane and circular waves. Explanation of the properties. |
20. Light waves |
(a) Sources of light |
Natural and artificial. Luminous and non-luminous bodies. |
(b) Rectilinear propagation of light |
Formation of shadows and eclipse. Pinhole camera. Simple numerical problems may be set. | |
(c) Reflection of light at plane surface: plane mirror |
Regular and irregular reflections. Verification of laws of reflection. Formation of images. Inclined plane mirrors. Rotation of mirrors. Applications in periscope, sextant and kaleidoscope. | |
(d) Reflection of light at curved surfaces: concave and convex mirrors |
Laws of reflection. Formation of images.
Characteristics of images. Use of mirror formulae:
1/u + 1/v = 1/f
and magnification m = v/u
to solve
numerical problems. (Derivation of formulae is not required) Experimental determination of the focal length of concave mirror. Applications in searchlight, parabolic and driving mirrors, car headlamps etc. |
|
(e) Refraction of light at plane surfaces: rectangular glass prism (block) and triangular prism. |
Laws of refraction. Formation of images, real and
Apparent depths. Critical angle and total internal
reflection. Lateral displacement and angle of
deviation. Use of minimum deviation equation: μ = Sin (A + Dm)/2/ Sin A/2 |
|
(f) Refraction of light at curved surfaces: Converging and diverging lenses |
(Derivation of the formula is not required)
Applications: periscope, prism binoculars, optical
fibres. The mirage. Formation of images. Use of lens formulae 1/u + 1/v = 1/f and magnification v/u to solve numerical problems. (derivation of the formulae not required). Experimental determination of the focal length of converging lens. Power of lens in dioptres (D) |
|
(g) Application of lenses in optical instruments. |
Simple camera, the human eye, film projector, simple and compound microscopes, terrestrial and astronomical telescopes. Angular magnification. Prism binoculars. The structure and function of the camera and the human eye should be compared. Defects of the human eye and their corrections. | |
(h) Dispersion of white light by a triangular glass prism. |
Production of pure spectrum of a white light. Recombination of the components of the spectrum. Colours of objects. Mixing coloured lights. | |
21. Electromagnetic waves: |
Types of radiation in electromagnetic Spectrum |
Elementary description and uses of various types of radiation: Radio, infrared, visible light, ultra-violet, X-rays, gamma rays. |
22. Sound Waves |
(a) Sources of sound |
Experiment to show that a material medium is required. |
(c) Speed of sound in solid, liquid and air |
To be compared. Dependence of velocity of sound on temperature and pressure to be considered. | |
(d) Echoes and reverberation |
Use of echoes in mineral exploration, and determination of ocean depth. Thunder and multiple reflections in a large room as examples of reverberation. | |
(e) Noise and music |
Pitch, loudness and quality. | |
(g) Vibration in strings |
The use of sonometer to demonstrate the dependence
of frequency (f) on length (1), tension (T) and mass
per unit length (liner density) (m) of string should be
treated. Use of the formula: fo = 1/2l√(T/m) In solving simple numerical problems. Applications in stringed instruments: e.g. guitar, piano, harp and violin. |
|
(h) Forced vibration |
Use of resonance boxes and sonometer to illustrate forced vibration. | |
(i) Resonance |
Use of overtones to explain the quality of a musical note. Applications in percussion instruments: e.g drum, bell, cymbals, xylophone. | |
(i) Vibration of air in pipe – open and closed pipes |
Measurement of velocity of sound in air or
frequency of tuning fork using the resonance tube. Use of the relationship v = 𝑓𝛌 in solving numerical problems. End correction is expected to be mentioned. Applications in wind instruments e.g. organ, flute, trumpet, horn, clarinet and saxophone. |
|
FIELDS |
||
TOPICS |
CONTENTS |
NOTES |
23. Description property of fields. |
(a) Concept of fields: Gravitational, electric and Magnetic |
|
(b) Properties of a force field |
Use of compass needle and iron filings to show magnetic field lines. | |
24. Gravitational field |
(a) Acceleration due to gravity, (g) |
G as gravitational field intensity should be mentioned, g = F/m. |
(b) Gravitational force between two masses: |
Masses include protons, electrons and planets | |
Newton’s law of gravitation |
Universal gravitational constant (G) Relationship between ‘G’ and ‘g’ | |
(c) Gravitational potential and escape velocity. |
Calculation of the escape velocity of a rocket from the earth’s gravitational field. | |
25. Electric Field |
(1) Electrostatics |
Production by friction, induction and contact. |
(b) Types of distribution of charges |
A simple electroscope should be used to detect and compare charges on differently-shaped bodies. | |
(c) Storage of charges |
Application in light conductors. | |
(d) Electric lines of force |
Determination, properties and field patterns of charges. | |
(e) Electric force between point charges: Coulomb’s law |
Permittivity of a medium. | |
(f) Concepts of electric field, electric field intensity (potential gradient) and electric potential. |
Calculation of electric field intensity and electric potential of simple systems. | |
(g) Capacitance- Definition, arrangement and application |
Factors affecting the capacitance of a parallel-plate capacitor. The farad (F) as unit of capacitance. Capacitors in series and in parallel. Energy stored in a charged capacitor. Uses of capacitors: e.g. in radio and Television. (Derivation of formulae for capacitance is not required) | |
(2) Current electricity |
Simple cell and its defects. Daniel cell, Lechanché cell (wet and dry). Lead-acid accumulator. Alkalne-cadium cell. E.m.f. of a cell, the volt (V) as unit of e.m.f. | |
(b) Potential difference and electric current |
Ohm’s law and resistance. Verification of Ohm’s law. The volt (V), ampere (A) and ohm (Ω) as units of p.d., current and reisistance respectively. | |
(c) Electric circuit |
Series and parallel arrangement of cells and resistors. Lost volt and internal resistance of batteries. | |
(d) Electric conduction through materials |
Ohmic and non ohmic conductors. Examples of ohmic conductors are metals, non-ohmic conductors are semiconductors. | |
(e) Electric energy and power |
Quantitative definition of electrical energy and power. Heating effect of an electric current and its application. Conversion of electrical energy to mechanical energy e.g. electric motors. Conversion of solar energy to electrical and heat energies: e.g. solar cells, solar heaters. | |
(f) Shunt and multiplier |
Use in conversion of a galvanometer into an ammeter and a voltmeter. | |
(g) Resistivity and Conductivity |
Factors affecting the electrical resistance of a material should be treated. Simple problems may be set. | |
(h) Measurement of electric current, potential difference, resistance, e.m.f. and internal resistance of a cell. |
Principle of operation and use of ammeter, voltmeter, potentiometer. The wheatstone bridge and metre bridge. | |
26. Magnetic field |
(a) Properties of magnets and magnetic materials. |
Practical examples such as soft iron, steel and alloys. |
(b) Magnetization and demagnetization. |
Temporary and permanent magnets. Comparison of iron and steel as magnetic materials. | |
(c) Concept of magnetic field |
Magnetic flux and magnetic flux density. Magnetic field around a permanent magnet, a current-carrying conductor and a solenoid. Plotting of line of force to locate neutral points Units of magnetic flux and magnetic flux density as weber (Wb) and tesla (T) respectively. | |
(d) Magnetic force on: |
Qualitative treatment only. Applications: electric motor and moving-coil galvanometer. | |
(e) Use of electromagnets |
Examples in electric bell, telephone earpiece etc. | |
(f) The earth’s magnetic field |
Mariner’s compass. Angles of dip and declination. | |
(g) Magnetic force on a moving charged particle |
Solving simple problems involving the motion of a charged particle in a magnetic field, using F=qvB sin 𝜃 | |
27. Electromagnetic field |
(a) Concept of electromagnetic field |
Identifying the directions of current, magnetic field and force in an electromagnetic field (Fleming’s lefthand rule). |
(b) Electromagnetic induction |
Applications: Generator (d.c.and a.c.) induction coil and transformer. The principles underlying the production of direct and alternating currents should be treated. Equation E = Eo Sinwt should be explained. | |
(c) Inductance |
Qualitative explanation of self and mutual
inductance. The unit of inductance is henry (H). (E = ½LI2) Application in radio,T.V., transformer. (Derivation of formula is not required). |
|
(d) Eddy currents |
A method of reducing eddy current losses should be treated. Applications in induction furnace, speedometer, etc. | |
(e) Power transmission and distribution |
Reduction of power losses in high-tension transmission lines. Household wiring system should be discussed. | |
(f) Shunt and multiplier |
Use in conversion of a galvanometer into an ammeter and a voltmeter. | |
(g) Resistivity and Conductivity |
Factors affecting the electrical resistance of a material should be treated. Simple problems may be set. | |
(h) Measurement of electric current, potential difference, resistance, e.m.f. and internal resistance of a cell. |
Principle of operation and use of ammeter, voltmeter, potentiometer. The wheatstone bridge and metre bridge. | |
28. Simple a.c. circuits |
(a) Graphical representation of e.m.f and current in an a.c. circult. |
Graphs of equation I – Io sin wt and\E = Eo sinwt should be treated. |
(b) Peak and r..m.s. values |
Phase relationship between voltage and current in the circuit elements; resistor, inductor and capacitor. | |
(c) Series circuit containing resistor, inductor and capacitor |
Simple calculations involving a.c. circuit. (Derivation of formulae is not required.) | |
(d) Reactance and impedance |
XL and Xc should be treated. Simple numerical problems may be set. | |
(e) Vector diagrams |
||
(f) Resonance in an a.c, circuit |
Applications in tuning of radio and T.V. should be discussed. | |
(g) Power in an a.c. circuit. |
||
ATOMIC AND NUCELAR PHYSICS |
||
TOPICS |
CONTENTS |
NOTES |
29. Structure of the atom |
(a) Models of the atom |
Thomson, Rutherford, Bohr and electroncloud (wave-mechanical) models should be discussed qualitatively. Limitations of each model. Quantization of angular momentum (Bohr) |
(b) Energy quantization |
Energy levels in the atom. Colour and light frequency. Treatment should include the following: Frank-Hertz experiment, Line spectra from hot bodies, absorption spectra and spectra of discharge lamps. | |
(c) Photoelectric effect |
Explanation of photoelectric effect. Dual nature of light. Work function and threshold frequency. Einstein’s photoelectric equation and its explanation. Application in T.V., camera, etc. Simple problems may be set. | |
(d) Thermionic emission |
Explanation and applications. | |
(e) X-rays |
Production of X-rays and structure of X-ray
tube. Types, characteristics, properties, uses and hazards of X-rays. Safety precautions |
|
30. Structure of the nucleus |
(a) Composition of the nucleus |
Protons and neutrons. Nucleon number (A), proton number (Z), neutron number (N) and the equation: A-Z + N to be treated. Nuclides and their notation. Isotopes. |
(b) Radioactivity – |
Radioactive elements, radioactive emissions (𝛼, β, 𝛾) and their properties and uses. Detection of radiations by G – M counter, photographic plates, etc. should be mentioned. Radioactive decay, half-life and decay constant. Transformation of elements. Applications of radioactivity in agriculture, medicine, industry, archaeology, etc. | |
(b) Nuclear reactions |
Distinction between fusion and fission.
Binding energy, mass defect and energy
equation: E= Δ mc2 Nuclear reactors. Atomic bomb. Radiation hazards and safety precautions. Peaceful uses of nuclear reactions. |
|
31. Wave-particle paradox |
(a) Electron diffraction |
Simple illustration of the dual nature of light. |
|
||
|---|---|---|
TOPICS |
NOTES |
|
1. Derived quantities and dimensional Analysis |
Fundamental quantities and units e.g. Length, mass,
time, electric current, luminous intensity e.t.c., m,
kg,s, A, cd, e.t.c. as their respective units
Derived quantities and units. e.g. volume, density,
speed e.t.c. m3, kgm-3, ms-1 e.t.c. as their respective
unit Explanation of dimensions in terms of fundamental and derived quantities. Uses of dimensions - to verity dimensional correctness of a given equation - to derive the relationship between quantities - to obtain derived units. |
|
2. Projectile motion concept of projectiles as an object thrown/release into space |
Applications of projectiles in warfare, sports etc. Simple problems involving range, maximum height and time of flight may be set. | |
3. Satellites and rockets |
Meaning of a satellite comparison of natural and
artificial satellites parking orbits, Geostationary
satellites and period of revolution and speed of a
satellite. Uses of satellites and rockets |
|
4. Elastic Properties of solid: |
Behaviour of elastic materials under stress – features of load – extension graph Simple calculations on Hook’s law and Young’s modulus. | |
Thermal conductivity: Solar energy collector and Black body Radiation. |
Solar energy; solar panel for heat energy supply. Explanation of a blackbody. Variation of intensity of black body radiation with wavelength at different temperatures. | |
5. Fibre Optics |
Explanation of concept of fibre optics. Principle of transmission of light through an optical fibre Applications of fibre optics e.g. local area Networks (LAN) medicine, rensing devices, carrying laser beams e.t.c. |
|
6. Introduction to LASER |
Meaning of LASER Types of LASERS (Solid state, gas, liquid and semi-conductor LASERS Application of LASERS (in Scientific research, communication, medicine military technology, Holograms e.t.c. Dangers involved in using LASERS. |
|
7. Magnetic materials |
Uses of magnets and ferromagnetic materials. | |
8. Electrical Conduction through materials [Electronic] |
Distinction between conductors, semiconductors and
insulators in term of band theory. Semi conductor materials (silicon and germanium) Meaning of intrinsic semiconductors. (Example of materials silicon and germanium). Charge carriers Doping production of p-type and n-type extrinsic semi conductors. Junction diode – forward and reverse biasing, voltage characteristics. Uses of diodes Half and full wave rectification. |
|
9. Structure of matter |
Use of kinetic theory to explain diffusion. | |
10. Wave – particle paradox |
Electron diffraction Duality of matter Simple illustrations of dual nature of light. |
|