Recent Scheme of Work on Electrical Installation And Maintenance Work

Syllabus for Senior Secondary

FIRST TERM
SSS 1 SSS 2 SSS 3
WEEK 1: Revision
WEEK 1: Revision
WEEK 1: Revision
WEEK 2

Theme: Workshop Safety Rules And Regulation
Topic: Hazards in Electrical Installation Work
Sub-Topic:
Content:
cause of accidents
WEEK 2

Theme: Workshop Safety Rules And Regulations
Topic: Danger in Electrical Workshop
Sub-Topic:
Content:
Portable equipment’s and tools Effectiveness of earth continuity conductor Water and chemicals.
WEEK 2

Theme: Workshop Safety Rules And Regulation
Topic: First Aid for Electrical Accidents
Sub-Topic:
Content:
1. First aid box
2. First aid treatments for electrical accidents
3. Maintain accident records
WEEK 3

Theme: Workshop Safety Rules And Regulation
Topic: Hazards in Electrical Installation Work (Cont.)
Sub-Topic:
Content:
cause of accidents
WEEK 3

Theme: Workshop Safety Rules And Regulations
Topic: Danger in Electrical Workshop
Sub-Topic:
Content:
Temporary insulations Use of cable without mechanical protection Cable run over sharp edges etc.
WEEK 3

Theme: Workshop Safety Rules And Regulation
Topic: Statutory Regulations
Sub-Topic:
Content:
Statutory regulations as it concerns use of conductors
i) Use of conductors
ii) soldering of terminals
iii) Handing of are conductors and general safety rules.
WEEK 4

Theme: Workshop Safety Rules And Regulation
Topic: Hazards in Electrical Installation Work
Sub-Topic:
Content:
prevention of accidents
WEEK 4

Theme: Workshop Safety Rules And Regulations
Topic: Danger in Electrical Workshop
Sub-Topic:
Content:
Other sources of danger e.g. Unprotected electric heaters. Over-loaded or over fused cable, particularly flexes.
WEEK 4

Theme: Electrical Installation Tools And Accessories
Topic: Data Communication and Cabling Methods
Sub-Topic:
Content:
1. Types of data communication cables e.g. computer cable fiber optic and co–axial cable
2. Uses of data communication.
WEEK 5

Theme: Workshop Safety Rules And Regulation
Topic: Hazards in Electrical Installation Work (Cont.)
Sub-Topic:
Content:
prevention of accidents
WEEK 5

Theme: Workshop Safety Rules And Regulations
Topic: Danger in Electrical Workshop
Sub-Topic:
Content:
Points of danger for the electrician e.g. Burns, falls, ladders, aluminum, ladders.
WEEK 5

Theme: Electrical Installation Tools And Accessories
Topic: Tools and Equipment for Winding Jobs
Sub-Topic:
Content:
1. Tools and equipment used for winding jobs e.g.
a. Hammers
b. Screw drivers
c. Spanners
d. Crimping
e. Hacksaws
f. Penknives
g. Mallets
h. Workbenches
i. Winding machines
2. Selection of tools and equipment.
WEEK 6

Theme: Workshop Safety Rules And Regulation
Topic: Measuring, Making and Striking, Tools Types and Preparation of Cables
Sub-Topic:
Content:
Types and uses of measuring instruments.
WEEK 6

Theme: Workshop Safety Rules And Regulations
Topic: Danger in Electrical Workshop
Sub-Topic:
Content:
Strains and moving machinery.
WEEK 6

Theme: Electrical Installation Tools And Accessories
Topic: Cells
Sub-Topic:
Content:
1. Types of cells primary and secondary
2. Working principles of primary and secondary cells
3. Construction of a simple cell.
WEEK 7

Theme: Workshop Safety Rules And Regulation
Topic: Measuring, Making and Striking, Tools Types and Preparation of Cables
Sub-Topic:
Content:
Practical application of measuring instruments.
WEEK 7

Theme: Workshop Safety Rules And Regulations
Topic: Danger in Electrical Workshop (Cont.)
Sub-Topic:
Content:
Strains and moving machinery.
WEEK 7

Theme: Workshop Practices
Topic: AC and DC Machines
Sub-Topic:
Content:
1. Operation of DC and AC motor
2. Operation of DC and AC generator
3. Constructional features of AC and DC machines
4. differences between
i) AC and DC motors
ii) AC and DC generators
and state their applications.
WEEK 8

Theme: Workshop Safety Rules And Regulation
Topic: Measuring, Making and Striking, Tools Types and Preparation of Cables
Sub-Topic:
Content:
Types and uses of marking and striking tools (e.g. scriber, punch)
WEEK 8

Theme: Workshop Safety Rules And Regulations
Topic: Precaution in Handling Electrical Tools and Materials
Sub-Topic:
Content:
Care of electrical tools
WEEK 8

Theme: Workshop Practices
Topic: Installation of Machines
Sub-Topic:
Content:
1. Types of enclosures and their application
2. Suitable starter for different motor e.g. star-delta, direction line and explain their principle of operation
3. Installation of AC and Dc machines
4. Mounting machines and equipment’s.
WEEK 9

Theme: Workshop Safety Rules And Regulation
Topic: Measuring, Making and Striking, Tools Types and Preparation of Cables
Sub-Topic:
Content:
Types and preparation of cables.
WEEK 9

Theme: Workshop Safety Rules And Regulations
Topic: Precaution in Handling Electrical Tools and Materials
Sub-Topic:
Content:
Maintenance of electrical tools.
WEEK 9

Theme: Workshop Practices
Topic: Installation of Machines (Cont.)
Sub-Topic:
Content:
1. Types of enclosures and their application
2. Suitable starter for different motor e.g. star-delta, direction line and explain their principle of operation
3. Installation of AC and Dc machines
4. Mounting machines and equipment’s.

WEEK 10: REVISION AND EXAMININATION
WEEK 10: REVISION AND EXAMININATION
WEEK 10: REVISION AND EXAMININATION

We provide educational resources/materials, curriculum guide, syllabus, scheme of work, lesson note & plan, waec, jamb, O-level & advance level GCE lessons/tutorial classes, on various topics, subjects, career, disciplines & department etc. for all the Class of Learners

SECOND TERM
SSS 1 SSS 2 SSS 3
WEEK 1: Revision
WEEK 1: Revision
WEEK 1: Revision
WEEK 2

Theme: Workshop Practices
Topic: Working Drawing
Sub-Topic:
Content:
Electric symbols (switches, lamp holders, socket out lets, cooker control unit etc.)
WEEK 2

Theme: Electrical Installation And Tools Accessories
Topic: Electrical Accessories
Sub-Topic:
Content:
Types of electrical accessories
WEEK 2

Theme: Workshop Practices
Topic: Winding Drawing
Sub-Topic:
Content:
1. Draw and interpretation of simple wave and lap winding drawings
2. Application of ware winding and simple lap winding drawings.
3. Determination of coil span per pitch, per phase, per pole
4. Position of coil ends on commutation/stop rings for fixed brush on a developed winding diagram.
WEEK 3

Theme: Workshop Practices
Topic: Working Drawing
Sub-Topic:
Content:
1. Working diagram scale and position of accessories on drawing.
2. Electrical accessories (e.g. lap holder, celling rose, joint box etc.)
WEEK 3

Theme: Electrical Installation And Tools Accessories
Topic: Electrical Accessories
Sub-Topic:
Content:
Uses of electrical accessories
WEEK 3

Theme: Workshop Practices
Topic: Rewinding of Electric Motor
Sub-Topic:
Content:
1. Sizes of conductors and types of insulating materials used in winding
2. Construction of winding formers, preparation and fixing of winding coils in their slots.
3. Connection of winding coils using prepaid data
4. Continuity and earthling test.
WEEK 4

Theme: Workshop Practices
Topic: Working Drawing
Sub-Topic:
Content:
Distribution (Grid) system and electrical installation diagrams.
WEEK 4

Theme: Electrical Installation And Tools Accessories
Topic: Electrical Accessories
Sub-Topic:
Content:
Regulation Guiding loading of accessories (e.g. 5A, 13A, and 15A. socket out.
WEEK 4

Theme: Workshop Practices
Topic: Armature, Commutator and Slip Rings
Sub-Topic:
Content:
1. Skimming of armature, slip ring and commutation
2. Undercutting of commutations
3. Effectiveness of commutation
WEEK 5

Theme: Workshop Practices
Topic: Surface Wiring
Sub-Topic:
Content:
Sizes of cables and conductors, flexible cords (e.g. 1mm2, 15mm2, 2.5mm2 etc.)
WEEK 5

Theme: Electrical Installation And Tools Accessories
Topic: Electrical Accessories (Cont.)
Sub-Topic:
Content:
Regulation Guiding loading of accessories (e.g. 5A, 13A, and 15A. socket out.
WEEK 5

Theme: Workshop Practices
Topic: Entrepreneurship in Electrical Installation
Sub-Topic:
Content:
1. Merchandizing of electrical goods
2. Sourcing of fund for business takes off.
3. Management of business outfit.
4. Proposal writing
5. Budgeting
WEEK 6

Theme: Workshop Practices
Topic: Surface Wiring
Sub-Topic:
Content:
1. Clips, nails drill
2. Current rating of a cable diversity
WEEK 6

Theme: Electrical Installation And Tools Accessories
Topic: Armored Cables
Sub-Topic:
Content:
Types of armored cable
WEEK 6

Theme: Protective Devices And Maintenance
Topic: Maintenance of Electrical Equipment
Sub-Topic:
Content:
1. Types of maintenance
2. Procedure for machine and equipment maintenance
3. Lubricants and application
4. Machines maintenance and testing
5. Constructional features of some electrical appliances (e.g.) electric heater, boiler, iron etc.
WEEK 7

Theme: Workshop Practices
Topic: Surface Wiring
Sub-Topic:
Content:
Factors affecting current rating of cable (e.g. type of conductor, ambient temperature, type of excess current protection etc.)
WEEK 7

Theme: Electrical Installation And Tools Accessories
Topic: Armored Cables
Sub-Topic:
Content:
Reasons for armoring
WEEK 7

Theme: Protective Devices And Maintenance
Topic: Repair of Electrical Machines, Equipment and Installation
Sub-Topic:
Content:
1. Inspection of the bearing and other parts of the machines.
2. Systematic assembling of machine parts
3. Identification of parts of machine by inspection
4. Test for continuity voltage and current.
WEEK 8

Theme: Workshop Practices
Topic: Conduit Wiring
Sub-Topic:
Content:
1. Piping
2. Wiring
WEEK 8

Theme: Electrical Installation And Tools Accessories
Topic: Armored Cables
Sub-Topic:
Content:
Parts of armored cable
WEEK 8

Theme: Protective Devices And Maintenance
Topic: Final Inspection and Testing of Machines
Sub-Topic:
Content:
1. Inspection of the bearing and other part of the machines
2. Systematic assembling of machines parts
3. Identification of parts of machines by inspection
4. Test for continuity voltage and current.
WEEK 9

Theme: Workshop Practices
Topic: Conduit Wiring
Sub-Topic:
Content:
1. Fittings
2. Types of conduit wiring (surface, conceal
WEEK 9

Theme: Electrical Installation And Tools Accessories
Topic: Armored Cables
Sub-Topic:
Content:
Join and termination of armored cable.
WEEK 9

Theme: Protective Devices And Maintenance
Topic: Dismantling of Machines
Sub-Topic:
Content:
1. Dismantling of machines.
2. Front and back shield
3. Methods of collecting and recording data from main plate.
4. Systematic dismantling of the brushes and determination of types of winding connection.

WEEK 10: REVISION AND EXAMININATION
WEEK 10: REVISION AND EXAMININATION
WEEK 10: REVISION AND EXAMININATION

We provide educational resources/materials, curriculum guide, syllabus, scheme of work, lesson note & plan, waec, jamb, O-level & advance level GCE lessons/tutorial classes, on various topics, subjects, career, disciplines & department etc. for all the Class of Learners

THIRD TERM
SSS 1 SSS 2 SSS 3
WEEK 1: Revision
WEEK 1: Revision
WEEK 1: Revision
WEEK 2

Theme: Protective Devices And Maintenance
Topic: Installation of Devices
Sub-Topic:
Content:
protective devices ( fuses, circuit breakers, voltage and current operated)
WEEK 2

Theme: Workshop Practices
Topic: Illumination
Sub-Topic:
Content:
1. Concepts and factors of illumination
2. Types of lamps.
3. Mathematical calculations on illumination
4. Illumination (e.g. calculating and mounting lamps in given area)
5. Measurement of illumination using the photometer.
WEEK 2

Theme:
Topic:
Sub-Topic:
Content:
WEEK 3

Theme: Protective Devices And Maintenance
Topic: Installation of Devices (Cont.)
Sub-Topic:
Content:
protective devices ( fuses, circuit breakers, voltage and current operated)
WEEK 3

Theme: Workshop Practices
Topic: Soldering
Sub-Topic:
Content:
1. Types of conductor materials e.g. copper, aluminum and silver
2. Operation and maintenance of blow-lamp
3. Sizes of cables
4. The use of pot and ladle in soldering big sizes of cable
5. Soldering of joints
WEEK 3

Theme:
Topic:
Sub-Topic:
Content:
WEEK 4

Theme: Protective Devices And Maintenance
Topic: Installation of Devices
Sub-Topic:
Content:
Working principles and application of fuses and circuit breakers.
WEEK 4

Theme: Workshop Practices
Topic: Joints and Termination of Cables
Sub-Topic:
Content:
1. Tools and materials used in cable jointing e.g. soldering bit, blow-lamp, lead, soldering iron, propane gas, pot and ladle insulated pliers, flux, and different sizes of cables.
2. Types of insulating materials e.g. P.V.C rubber etc.
3. Types of conductors e.g. copper, aluminum etc.
4. Making simple joints e.g. tee joints, married joints, scarf joint etc.
5. Fixing of appliances and accessories into their terminals.
WEEK 4

Theme:
Topic:
Sub-Topic:
Content:
WEEK 5

Theme: Protective Devices And Maintenance
Topic: Installation of Devices (Cont.)
Sub-Topic:
Content:
Working principles and application of fuses and circuit breakers.
WEEK 5

Theme: Workshop Practices
Topic: Installation
Sub-Topic:
Content:
1. MICC cable, tools and materials used in MICC installation
2. Termination e.g. compound, stealing pot and statutory regulation, advantages and disadvantages of MICC.
3. Simple surface and industrial installation.
4. Types of bas-box trucking, fabrication of ducts and trucking accessories.
WEEK 5

Theme:
Topic:
Sub-Topic:
Content:
WEEK 6

Theme: Protective Devices And Maintenance
Topic: Installation of Devices
Sub-Topic:
Content:
Current rating of a fuse,
WEEK 6

Theme: Workshop Practices
Topic: Underground Cable Installation
Sub-Topic:
Content:
1. Types of cable for underground electrical installation work e.g. sheeted cable, screened or H-type cable (screened lead), single and three cord 1342 KV oil filed cable, external gas pressure and gas pressure impregnated cable , PVC armored DIL.
2. Trench preparation
3. Lying of underground cable.
4. Materials and tools for and terminations in underground cable IEE regulations for underground cables.
WEEK 6

Theme:
Topic:
Sub-Topic:
Content:
WEEK 7

Theme: Protective Devices And Maintenance
Topic: Installation of Devices (Cont.)
Sub-Topic:
Content:
fusing current and earthling.
WEEK 7

Theme: Workshop Practices
Topic: Installation of Overhead Wires
Sub-Topic:
Content:
1. Tools, cable/wire, and equipment in overhead distributions/transmission e.g. draw vice, safety belt, ladder, insulators
2. Types and uses of stray wires
3. Drawing of line and cross arms
4. Joints and terminations and electrical continuity
WEEK 7

Theme:
Topic:
Sub-Topic:
Content:
WEEK 8

Theme: Protective Devices And Maintenance
Topic: Installation of Devices
Sub-Topic:
Content:
IEE regulations covering earthling and protective devices, voltages and current earth leakage circuit breakers.
WEEK 8

Theme: Workshop Practices
Topic: Inspection and Testing of Domestic Installation
Sub-Topic:
Content:
1. Importance of testing and inspection
2. Types and sequence of test e.g. polarity, earth, insulation resistance test and continuity of ring circuit test
3. Instrument for testing e.g. merger
4. Tests.
WEEK 8

Theme:
Topic:
Sub-Topic:
Content:
WEEK 9

Theme: Protective Devices And Maintenance
Topic: Installation of Devices (Cont.)
Sub-Topic:
Content:
IEE regulations covering earthling and protective devices, voltages and current earth leakage circuit breakers.
WEEK 9

Theme: Workshop Practices
Topic: Inspection and Testing of Domestic Installation (Cont.)
Sub-Topic:
Content:
1. Importance of testing and inspection
2. Types and sequence of test e.g. polarity, earth, insulation resistance test and continuity of ring circuit test
3. Instrument for testing e.g. merger
4. Tests.
WEEK 9

Theme:
Topic:
Sub-Topic:
Content:

WEEK 10: REVISION AND EXAMININATION
WEEK 10: REVISION AND EXAMININATION
WEEK 10: REVISION AND EXAMININATION

Free Will Donation

We know times are tough right now, but if you could donate and support us, be rest assured that your great contributions are immensely appreciated and will be for the progress of our work to help us pay for the server cost, domain renewal, and other maintenance costs of the site. Nothing is too small; nothing is too little.

Account Details

BANK: UNITED BANK FOR AFRICA PLC

ACCOUNT NAME: OFAGBE GODSPOWER GEORGE

ACCOUNT NUMBER: 2250582550

SWIFT CODE: UNAFNGLA

ACCOUNT TYPE: SAVINGS

CURRENCY: DOLLAR (USD) ACCOUNT

ADDRESS: 1. M. Aruna Close, Ughelli, Delta State, Nigeria

PHONE: +234805 5084784, +234803 5586470



BANK: UNITED BANK FOR AFRICA Plc (UBA)

ACCOUNT NAME: OFAGBE GODSPOWER GEORGE

ACCOUNT NUMBER: 2042116266

SORT CODE: 033243371

ACCOUNT TYPE: SAVINGS

CURRENCY: NAIRA ACCOUNT

ADDRESS: 1. M. Aruna Close, Ughelli, Delta State, Nigeria

PHONE: +234805 5084784, +234803 5586470



Your active support gives strength to our Team and inspires to work. Each donated dollar is not only money for us, but it is also the confidence that you really need our project!
AseiClass is a non-profit project that exists at its founders' expense, it will be difficult to achieve our goals without your help.
Please consider making a donation.
Thank you.


AseiClass Team

Facts about Teachers

● ● ● Teachers Are Great No Controversy.

● ● ● Teachers are like candles, they burn themselves to light others.

● ● ● Teachers don't teach for the money.

● ● ● Every great mind was once taught by some brilliant teachers.

● ● ● Teachers are the second parents we have.

● ● ● If you can write your name, thank your teacher.

Teaching slogans

● ● ● Until the learner learns the teacher has not taught.

● ● ● I hear and forget, I see and remember, I do and know.

● ● ● The good teacher explains. The superior teacher demonstrates. The great teacher inspires.

We provide educational resources/materials, curriculum guide, syllabus, scheme of work, lesson note & plan, waec, jamb, O-level & advance level GCE lessons/tutorial classes, on various topics, subjects, career, disciplines & department etc. for all the Class of Learners